Audio Technica AT-VM95E - Mm Cartridge & Stylus
Hardware - Audio Technica ATVM95E
(worldwide rates will be calculated at checkout stage)
This Vm95 Series Cartridge With 0.3 X 0.7 Mil Elliptical Stylus Fits Half-Inch Mount Turntables. The Cartridge'S Special Coil Design Delivers a Powerful Output Level Of 4.0 Mv. It Also Offers Excellent Channel Separation And Low Distortion For Outstanding Tonal Quality.
The Durable, Low-Resonance Housing Includes Threaded Inserts That Enable The Cartridge To Be Mounted To The Headshell With Just Two Screws – No Nuts Required. And Since All Vm95 Series Share The Same Body, The Stylus Can Be Replaced With Any Of The Six Interchangeable At-Vmn95 Replacement Styli. Frequency Response 20-22,000 Hz Channel Separation 20 (Db At 1 Khz) Vertical Tracking Force 1.8-2.2 G (2.0 G Standard) Stylus Construction Bonded Round Shank Recommended Load Impedance 47,000 Ohms Output 4.0 Mv (1 Khz, 5 Cm/Sec.) Channel Balance 2.0 Db (1 Khz) Stylus Shape 0.3 X 0.7 Mil Elliptical Cantilever Aluminum Pipe Mount Half-Inch Replacement Stylus At-Vmn95E Coil Impedance: 3.3 K Ohms (1 Khz) Dc Resistance: 485 Ohms Load Capacitance: 100 To 200 Pf Coil Inductance: 550 Mh (1 Khz) Vertical Tracking Angle: 23° Dimensions: 17.2 Mm (0.68") H × 18.9 Mm (0.74") W × 28.3 Mm (1.20") D Weight: 6.1 G (0.22 Oz) Accessories Included: Two 11 Mm Installation Screws, Two 8 Mm Installation Screws, Two Washers.
Send your friend an email about this item:
Use the form opposite to send an email to your friend
The email will contain information regarding this item and will have a link for them to easily find it on the HTFR website.
If you are logged into your profile it will automatically fill in your name and email address so all you need to do is enter your friend's email address to send them the email.