Audio Technica Vm750Sh - Mm Cartridge & Stylus
Hardware - Audio Technica VM750SH
(worldwide rates will be calculated at checkout stage)
Fitted With The Shibata Stylus, Which Was Developed For Playing 4 Channel Vinyl Records That Demand High-Frequency Reproduction Capabilities During Playback. Not Only For High-Frequencies, It Is Also Ideal For Reproducing Rich Mid- And Low-Frequencies. Aluminium Tapered Cantilever Para-Toroidal Coils Improve Generating Efficiency Centre Shield Plate Between The Left And Right Channels Reduces Crosstalk Die-Cast Aluminium Alloy Housing Reduces Vibration And Adds a Natural Electrical Shield Audio-Technica'S Internationally-Patented Dual Magnet Design Replicates The Structure Of The Cutter Head. Instead Of Using a Single, Large Magnet, The Two Magnets Are Arranged In The Shape Of a "V". The Two Magnets Are Positioned Precisely To Match The Positions Of The Left And Right Channels In The Stereo Groove Walls.
Consequently, The Vm Design Ensures Outstanding Channel Separation, Extended Frequency Response And Superb Tracking. Para-Toroidal Generating System Para-Toroidal Coils Improve Generating Efficiency And Offers Superb Linearity, Since Leakage Of Magnetic Flux In This Continuous And Unitised Magnetic Circuit Is Low. Permeability Of The Cores Is Also Optimised Through The Use Of Laminated Cores. Centre Shield Plate Reduces Crosstalk a Permalloy Centre Shield Plate Enables The Effective Separation Of Left And Right Channels, Suppressing Electrical Crosstalk To Below 40Db. This Is Similar To The Actual Crosstalk Value Found In The Grooves Of The Record Itself. 700 Series Top-End Model Fitted With The Die-Cast Aluminium Alloy Housing.
The Body Reduces The Unwanted Vibration And Enhances The Superior Sound Quality Of High-Performance Line Contact Styli. Shibata-Signature Sound Provides a Beautiful Mid-High Range Shibata-Signature Sound And Strong Mid-Range Volume. Type Vm Type Mounting 1/2” Centres Frequency Response 20 - 27,000Hz Channel Separation 30Db (1Khz) Output Channel Balance 1.0Db (1Khz) Output Voltage 4.0Mv (1Khz, 5Cm/Sec.) Vertical Tracking Angle 23° Vertical Tracking Force Range 1.8 – 2.2G (2.0G Standard) Stylus Shape Shibata Stylus Size 0.26 X 2.7 Mil Stylus Construction Nude Square Shank Cantilever Aluminium Tapered Pipe Coil Impedance 2,700O (1Khz) Static Compliance 40 X 10-6 Cm/Dyne Dynamic Compliance 10 X 10-6 Cm/Dyne (100Hz) Recommended Load Impedance 47,000O Recommended Load Capacitance 100 – 200Pf Weight 8.0G Dimensions 17.3 (H) X 17.0 (W) X 28.2 (L) Mm Replacement Stylus Vmn50Sh Accessories Included Cartridge Installation Screws 5Mm ×2 And 10Mm ×2, Washer ×2, Hexagon Nut ×2, Non-Magnetic Screwdriver ×1, Brush ×1, Lead Wire Set ×1.
Send your friend an email about this item:
Use the form opposite to send an email to your friend
The email will contain information regarding this item and will have a link for them to easily find it on the HTFR website.
If you are logged into your profile it will automatically fill in your name and email address so all you need to do is enter your friend's email address to send them the email.