ICON AUDIO STEREO 40 MK2 VALVE AMPLIFIER

Below are the full specifications for this product:

• HTFR Catalogue ID: MR169137
• High quality valve amplifier
• All components are hard wired (no circuit board)
• 40 watts per channel (equivalent to a 160 watt normal amplifier)
• 3 inputs (cd, tuner, aux)
• Tape monitor switch
• Comprehensive manual supplied
• Full instructions for valve change included
• All hand wired point to point
• No printed circuit board to 'colour' sound
• Japanese Blue ALPS volume pot.
• Class A, all Triode front end
• Output circuit Ultralinear or Triode switchable*
• 4x EL34/KT88 precisely matched for best performance
• 1x 6SL7 first stage valve
• 2x 6SN7 phase inverter valves
• Standby switch to prevent cathode stripping on startup
• Standby switch to save valve life and power only 35w
• Optional automatic HT delay to prevent cathode stripping
• Signal to noise level -90db
• Freq response better than 20hz-20kHz +0 - 0.5db
• Total harmonic distortion typically less than 0.1% 1khz
• Suitable for 4 to 16ohm loudspeakers
• Japanese steel EI transformers with low oxygen copper
• Attractive valve cover included in the price
• High quality 2W metal film, & wire-wound resistors
• Blue LED mains indicator
• Polypropylene audio capacitors
• Silver TEFLON audio cable
• Custom hand wound output transformers
• Ceramic valve holders for minimum leakage
• Centre tapped heater circuit for minimum hum
• 'Soft start' device incorporated
• Gold plated Input & speaker terminals
• Three line inputs
• Tape monitor circuit
• 350mv input sensitivity
• 230/240volts 135 watts typicly, 200w max. 1.6A AS fuse
• C E certified
• 350W, 350D, 250H, 23kg (remember to allow space for connections and ventilation)
•  
• Weight : 18kg
• Height : 25cm x Width : 32cm x Depth : 18cm
• Warranty : 12 Months
• Power : 240V/220V only

HTFR are able to offer on-site installation on every hardware product that we sell.

Please call us on 0121 687 7777 or use our contact us page to arrange an installation